Showing posts with label evaporate. Show all posts
Showing posts with label evaporate. Show all posts

Tuesday, September 27, 2016

Evaporants arrival

Here is a small delivery from Midwest Tungsten Services.
I got some filaments, gold tone, bronze, and aluminium.
They were very nice to deal with. I spent 100dolla' to get these bits including shipping from the US to Ireland. 
I hope to try the Alu today.
 
 This form is called "cane" I suppose this is goldtone.

With some digging on the net I found it might be possible to evaporate "dutch leaf", as in, fake gold leaf. Seems to be a suitable alloy.

Monday, June 10, 2013

I found a leak!

After a long absence from my metalisation project I decided to get back to it. I was having a real nightmare with my belljar not getting the vacuum level I was expecting. Or that I needed to even start a diff pump. There were so may potential leaks I was overwhelmed for a while. So I decided to go step by step and eliminate the possibilities starting at the pump.
Flexible pipe tested fine, under water with compressed air. The second section however had a f**king leak. Right there, bubble, bubble, bubble. I couldn't believe it. The solder joint looked fine but it was leaking.
So I Glyptaled it under a vacuum and I was all fixed up!
More to follow...